C) Checking And Setting The Linkage Rods; D) Checking And Setting The Auxiliary Paddles - Reely REX-X Wichtige Informationen

c) Checking and setting the linkage rods

First check the linkage rods of the rotor head. For the
required lengths of the individual rods, refer to the
illustration on the side or the diagram below.
If necessary, you can adjust the length of the linkage rods,
e.g. in order to set the swash plate horizontally or adjust
the rotor blade adjustment angle or the track.

d) Checking and setting the auxiliary paddles

Check whether the two paddles of the auxiliary rotor (1)
have the same distance to the paddle bridge (2) and are
absolutely parallel to each other.
In addition, both paddles must also be exactly parallel to
the paddle bridge (2).
1
B
Figure 17
A
2
Figure 18
45