Nick Function
With the help of the nick function you can move the model helicopter forward and backward. The control is effected
likewise with the right control stick.
•
If you press the stick slightly forward, the model flies forward.
•
If you pull the stick towards the back, the model flies backwards.
b) Modifying the transmitter-push stick assignment
If you want to fly with the pre-set stick assignments described above, then you can ignore this chapter. However, if
you wish to exchange the control of the pitch and nod function at the transmitter, you have the possibility to carry
out modifications on the transmitter. However, this requires some experience in handling remote control sensors
and a bit of skill.
•
First remove the batteries/accumulators from the battery compartment.
•
Unscrew the four screws by means of a Phillips-tip screwdriver from the rear panel of the transmitter and lift the
rear panel carefully.
•
Seen from the rear, loosen the stop spring (1) from the right control stick aggregate and screw it on mirrorinverted
to the left control stick aggregate (seen from the rear) to the attachment ().
•
Loosen the adjuster screw (3) for the restoring force of the nod control stick so far that the traction spring is as
slack as possible.
46
No. 07010 / 0700