D) Checking And Setting The Track Run; E) Checking And Setting The Track Run - Reely SKY Rex-X 500 Bedienungsanleitung

d) Checking and Setting the Tracking
Once you have made all the necessary settings on the transmitter and the mechanics, you can now check the tracking.
Tracking is best checked during flight. Mark one rotor blade at the end of the blade with dark or luminescent tape.
During hover flight at head height, you can see which rotor blade must be corrected. Adjust the accurate tracking of the
auxiliary paddle and rotor blades for the two linkage rods A and B.
A
B
Figure 14
e) Checking and Setting the gyros
Your helicopter is equipped with a high-quality gyro and only approximately preset. Before the first flight, the gyro
needs to be set according to the included gyro instructions. Also observe that the rotational direction of the tail rotor
servo is correctly set.
43