Connecting The Indoor Aerial; Switching The Device On/Off - Silvercrest SZA 28 B2 Bedienungsanleitung

Connecting the indoor aerial

GB
IE
Connecting to a TV
CY
♦ Connect the aerial cable
nection on your television. The aerial cable
cable
has an integrated DVB-T tuner.
Connection as a radio aerial
♦ If you use the indoor aerial
socket/coaxial socket adapter
♦ Connect the coaxial socket/coaxial socket adapter
aerial
♦ Connect the aerial cable
adapter
Connecting to a DVB-T receiver
♦ Connect the aerial cable
nection on your DVB-T receiver.
♦ To connect the indoor aerial
you will need to use the F connector/coaxial socket adapter
♦ Connect the F connector/coaxial socket adapter
♦ Screw the aerial cable
to the F connector on the DVB-T receiver.
NOTE
► After the device has been connected, you can control the signal strength
and quality via the DVB-T receiver. If you still do not have a suffi cient
picture quality, reposition your device at a better location.
Switching the device on/off
♦ To switch the indoor aerial
"ON" position.
♦ To switch the indoor aerial
"OFF" position.
10
can only be connected directly to the television if the television
.
2
to the 75 ohm connection on your hifi system.
9
with the F connector/coaxial socket adapter
2
from the indoor aerial
2
2
for radio reception, please use the coaxial
.
9
with the coaxial socket/coaxial socket
2
2 from the indoor aerial
to a DVB-T receiver with an F connector,
on, move the On/Off switch
off , move the On/Off switch
to the aerial con-
from the indoor aerial
to the indoor
9
to the aerial con-
.
8
to the indoor aerial
8
3
to the
3
to the
SZA 28 B2
.
2
8