b) Programming/ deleting telephone numbers
Proceed as follows for programming:
1. Activating programming mode
• Press "Prg" key
• Red "Mode" LED lights up, the entry level 1 is active
2. Selecting the memory location for telephone number
• Press "No" key
• Select the desired telephone memory location number (press key "1", "2" or "3" briefly)
• Red "Mode" LED flashes, the entry level 2 is active
3. Entering telephone number
• Enter telephone number (up to 22 digits)
• Confirm entry using the "#" key
• The red "Mode" LED goes off, the programming mode is terminated and the alarm dialler returns
to the normal operation
If you press the "#" key, without first entering any telephone number, the corresponding
memory location is deleted. This memory location is then, of course, also not used for an
alarm dialling, because no telephone number exists.
49