Safety Regulations - Ammann ACR 68 Originalbetriebsanleitung

1. Safety regulations

This Ammann machine has been designed and constructed in
conformance with current standards and directives. This ma-
chine can constitute a danger to persons and property however
if:
•
It is not used for the intended purpose
•
It is not operated by trained personnel
•
It is incorrectly modified or converted
•
The safety requirements are not observed
For this reason, all persons concerned with operation, mainte-
nance and repair of the machine must read and follow the safety
requirements. This may have to be confirmed with respect to
the user company by signature.
The following also apply:
•
The pertinent regulations for the prevention of accidents
•
Generally recognised safety rules and road traffic regulations
•
Country-specific requirements
Intended use
This machine is only intended for:
•
The compaction of all types of surfaces
•
Repairs to all types of surfaces
•
Stabilisation of pavements and roads
•
Working in trenches
•
Underfilling and compaction of verges
Improper use
The machine can constitute a hazard if used improperly by untrained
persons or not for the intended purpose.
For example:
•
Working in horizontal direction
•
Pile driving
•
Compaction of verges
Who is allowed to operate the machine?
Only trained, instructed and authorised persons over the age of 18
may operate the machine. The responsibilities must be clearly de-
fined and observed prior to operation of the machine.
In variance from this, minors can be employed, as long as it is neces-
sary to their training objective and their protection is assured by a su-
pervisor.
Persons who are under the influence of alcohol, medicines or drugs
must not operate, maintain or repair the machine.
Maintenance and repairs, in particular of hydraulic systems and elec-
tronic components require special knowledge and must be carried
out only by trained specialists (mechanics specialising in construc-
tion and agricultural machinery).
Conversions and changes to the machine
Unauthorised changes to the machine are not permitted for safety
reasons.
Original parts and accessories have been specially designed for the
machine. It should be noted that parts and special equipment not
supplied by Ammann Verdichtung GmbH are not approved by
Ammann Verdichtung GmbH. The installation and/or the use of such
products can also affect the active and/or passive safety.
The manufacturer disclaims all liability for any damage caused by
using non-original parts or special equipment.
Safety information contained in the operating and
maintenance instructions
The following terms and symbols are used in this operating manual
that draw attention to important information:
Refers to special information on how to use the machine
most efficiently.
Important
Refers to special information and/or orders and
prohibitions directed towards preventing damage
Attention
Refers to orders and prohibitions designed to
prevent injury or extensive damage.
Danger
Information on safe and environmentally-friendly
disposal of operating and ancillary agents as well
Environment
Loading the machine
Always shut off the motor when loading and transporting.
Secure the machine to prevent it tilting or slipping.
A risk to life exists if persons walk or stand under suspended loads.
It should be noted that the machine may swing when suspended.
Secure the machine on transport vehicles to prevent it rolling, slip-
ping or tilting.
Starting the machine
Before starting the machine
Familiarise yourself with the operating and control elements and
mode of operation of the machine and the working area.
Use personal protective equipment (protective helmet, safety shoes,
etc.)
Use hearing protection.
Before starting the machine, check whether:
•
The machine has any noticeable defects
•
All protective devices are securely in place
•
The control elements function
•
The machine is free from oily and ignitable material
•
All handles are free from grease, oils, fuels, dirt, snow and ice.
Only use machines that have been regularly maintained.
Starting in enclosed spaces, tunnels, mines or deep ditches
Engine exhaust gas are highly dangerous!
For this reason, when operating the machine in enclosed spaces,
tunnels, mines or deep ditches, it is important to ensure that there is
sufficient air to breath (see UVV «Construction work», BGV C22, pa-
ragraphs 40 and 41).
Operation
Guide the machine so that hands do not come against fixed objects;
risk of injury.
Guide the machine so that the operator cannot be crushed between
the machine and hard objects.
Listen for any abnormal noise and smoke. Locate the cause and
have the damaged repaired.
Do not hold the throttle below «MAX», as this can damage the cen-
trifugal clutch.
Never release the machine with the engine running.
Keep feet away from the tamping base plate
Parking the machine
If possible, park the machine on a level, firm surface.
Before leaving the machine:
Secure the machine to prevent it tilting.
31