6 Transport; 6.1 Safety Information - Invacare Aquatec Beluga Gebrauchsanweisung

Transport
CAUTION

Bath oils or salts can impair the performance of the lifting
scissors.
▸ If using such bath additives, do not exceed the recommen-
ded dose.
!
IMPORTANT
▸ Run the lift unloaded once to the top and then back to the
bottom (function test).
▸ Before using, check the temperature of the bath water.
1. Press and hold the Up button C until the seat is level with the edge
of the bathtub.
2. Make sure that the side flaps are level with the seat and rest flat on
the edge of the bathtub.
3. Fill the bath with water.
4. Sit on the side flap nearest to you as you would on a chair.
5. Slide backwards until you are sitting in the middle of the seat.
6. Turn yourself into the bathing position, by lifting one leg and then
the other over the edge of the bathtub.
7. Once you are sitting correctly, press the Down button E and hold
it down to lower the seat into the bathtub.
Once the seat has reached the lowest position, it is possible
i
to recline the backrest by continuing to hold the Down but-
ton E. This produces a
more comfortable bathing position and allows you to immerse
yourself deeper in the bathwater.
8. Keep the Down button pressed until the backrest has reached the
desired position.
To get out of the bathtub, follow these steps in reverse
order.
CAUTION

▸ When raising the bath lift, watch out for obstacles
such as handles, for example.
9. To raise the backrest or the bath lift, press the Up button C and
keep it pressed until it has reached the desired position.
6 Transport

6.1 Safety information

CAUTION

The backrest is not locked on the seat when it is folded
together and can come apart.
▸ Before transporting the device, remove the battery
from the guide on the backrest.
▸ Only transport the product at temperatures between 0 °C
and 40 °C, air pressure of 860 - 1060 hPa and humidity of
30 - 75%.
▸ Do not remove the suction cups when transporting the
bath lift.
1. Remove the battery from the guide of the backrest cover.
2. Disassemble the bath lift into two sections for transport (seat and
backrest). See Section 4.4 Disassembling the bath lift.
Beluga Bath Lift
13