Herunterladen Inhalt Inhalt Diese Seite drucken

10 Technical Data; 10.1 Dimensions And Weight; 10.2 Electronic Data; 10.3 Materials - Invacare Aquatec Beluga Gebrauchsanweisung

Badewannenlifter
Vorschau ausblenden Andere Handbücher für Aquatec Beluga:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 18
Technical data

10 Technical data

10.1 Dimensions and weight

Total length at lowest position
Total length at highest position
Total height at highest position
Total depth (backrest upright)
Total depth (backrest lowered)
Seat depth
Seat width with side flaps folded out
Seat width with side flaps folded in
Seat height at lowest position
Seat height at highest position
Backrest width
Minimum angle of backrest in the upright position
Minimum angle of backrest in the lowered position
Base plate width
Maximum load
Total weight without battery
Seat weight
Backrest weight
Battery weight
Charger weight

10.2 Electronic data

Activation force for the buttons of the
hand control
830 mm
Operating voltage
700 mm
Rated input power
1010 mm
Fuse
710 mm
Battery type
890 mm
Charger input
460 mm
700 mm
Charger output
380 mm
Charge time from low-voltage warning
60 mm
Type of protection, drive
420 mm
Type of protection, hand control
360 mm
Type of protection, entire device
14°
Sound power level
38°
1)
Protected against the penetration of water that is splashed
295 mm
against the housing from all directions.
Dust-proof and protected against the penetration of water during
2)
140 kg
temporary immersion.
12.9 kg
Protected against the penetration of water in the event of strong
3)
jets of water.
8.6 kg

10.3 Materials

4.3 kg
1.6 kg
Backrest
0.5 kg
Seatplate
PPGF
PPGF
Beluga Bath Lift
< 5 N
12 V DC
75 VA
5 A, slow-blow
Lead battery
100 - 240 V AC,
50 - 60 Hz, 15 VA
12 V DC, 400 mA
approx. 5 h
IP X6
3)
IP 67
2)
IP X4
1)
65 dB(A)
17

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis