Changing The Battery - Beurer FT 50 Bedienungsanleitung

External appearance and functions
water-tight
sensor
Button to recall
saved values
(memory button M)
1. Press down the cover of the battery compartment and
remove the battery.
2. Take a new CR-2032 lithium battery and align it with the
positive terminal (anode) facing upwards.
3. Place the battery into the battery compartment.
4. Slide the battery compartment cover back in.
When the battery gets weak, the battery
warning symbol appears (figure A).
It is still possible to measure the tempera-
ture. Battery must be replaced.
If the battery is nearly flat, "Lo" and the
battery warning symbol are displayed
(figure B). The thermometer switches off.
Replace battery promptly.

Changing the battery

button to turnon/off and
for taking readings (Scan)
battery cover
15
LCD display
Figure A
Figure B