Description; Recommendations For Use; Accessories - Hilti DSH 700 Bedienungsanleitung

2 Description

2.1 Use of the product as directed
The machine is intended for hand-held or walk-behind
use for dry or wet cutting of asphalt and mineral or metallic
construction materials using abrasive or diamond cutting
discs.
To reduce the amount of dust produced when cutting,
we recommend use of the wet cutting method.
The working environment may be as follows: construction
site, workshop, renovation, conversion or new construc-
tion.
To avoid the risk of injury, use only genuine Hilti ac-
cessories and cutting tools.
Observe the safety rules and operating instructions for
the accessories used.
Working on materials hazardous to the health (e.g. as-
bestos) is not permissible.
Observe the information printed in the operating instruc-
tions concerning operation, care and maintenance.
Observe the national health and safety requirements.
The machine is designed for professional use and may
be operated, serviced and maintained only by trained,
authorized personnel. This personnel must be informed
of any special hazards that may be encountered. The
machine and its ancillary equipment may present hazards
when used incorrectly by untrained personnel or when
used not as directed.
Take the influences of the surrounding area into account.
Do not use the power tool or appliance where there is a
risk of fire or explosion.
Modification of the machine or tampering with its parts is
not permissible.
Don't work in closed, poorly ventilated rooms.
2.2 Items supplied as standard
1 Machine
1 DSH tool set
1 Operating instructions
1 DSH consumables kit
2.3 Abrasive cutting discs for hand-guided
gasoline-powered cut-off saws
Abrasive cutting discs for gasoline-powered cut-off saws
are composed of synthetic resin-bonded abrasive gran-

3 Accessories

Accessories for the DSH 700 and DSH 900
Designation
Diamond cutting disc
Abrasive cutting disc
Two-stroke oil
Water supply unit
ulate. These cutting discs feature fabric or fiber rein-
forcement which improves their strength, toughness and
breakage resistance.
NOTE
Abrasive cutting discs for gasoline-powered cut-off saws
are used mainly for cutting ferrous and non-ferrous
metals.
NOTE
Various grit types such as aluminum oxide, silicon
carbide, zirconium, etc., with a different bonding material
(matrix) or matrix hardness, are available depending on
the construction material to be cut.
2.4 Diamond cutting discs for hand-guided
gasoline-powered cut-off saws
Diamond cutting discs for gasoline-powered cut-off saws
consist of a steel core (disc) with diamond segments
(metallically bonded industrial diamonds).
NOTE
Segmented diamond cutting discs or those with a con-
tinuous cutting face are mainly used for cutting asphalt
and mineral construction materials.
2.5 Cutting disc specifications
Diamond cutting discs in compliance with the require-
ments of EN 13236 are to be used with the machine.
Synthetic resin-bonded fiber-reinforced cutting discs in
compliance with EN 12413 (straight, not offset, type 41)
may also be used with this machine for working on metals.
The mounting instructions and instructions for use issued
by the disc manufacturer must also be observed.

2.6 Recommendations for use

We recommend that the workpiece is not cut through in
a single operation. Advance to the required depth of cut
by making several to-and-fro movements.
To avoid damaging the diamond cutting disc when dry
cutting, lift the blade out of the cut for approx. 10 seconds
every 30 to 60 seconds while the machine is still running.
To reduce the amount of dust produced when cutting,
we recommend use of the wet cutting method.
Short designation
DSH (1 L)
DWP 10
Item number, description
000000, See main catalog.
000000, See main catalog.
365827
365595
en
23