Spektrum AR6400LBL Bedienungsanleitung Seite 9

Programming the Brushless ESC
To access a programmable feature, power on with full throttle (musical confirmation sound).
• Pull throttle to center (1 long beep).
To assign No Brake: Push throttle to full (1 short beep). (Default)
To assign Soft Brake: Keep throttle at full for 5 seconds (2 short beeps).
To assign Center Brake: Keep throttle at full for 10 seconds (3 short beeps).
To assign Hard Brake: Keep throttle at full for 15 seconds (4 short beeps).
• Pull throttle to center, hold for 5 seconds (2 long beeps).
5°: Push throttle to full (1 short beep).
10°: Keep throttle at full for 5 seconds (2 short beeps).
15°: Keep throttle at full for 10 seconds (3 short beeps). (Default)
20°: Keep throttle at full for 15 seconds (4 short beeps).
25°: Keep throttle at full for 20 seconds (5 short beeps).
• Pull throttle to center, hold for 10 seconds (3 long beeps).
1.2–1.8ms: Push throttle to full (1 short beep). (Default)
1.1–1.9ms: Keep throttle at full for 5 seconds (2 short beeps).
• Pull throttle to center, hold for 15 seconds (4 long beeps).
0.25s: Push throttle to full (1 short beep). (Default)
1.0s: Keep throttle at full for 5 seconds (2 short beeps).
• Pull throttle to center, hold for 20 seconds (5 long beeps).
8kHz: Push throttle to full (1 short beep). (Default)
16kHz: Keep throttle at full for 5 seconds (2 short beeps).
32kHz: Keep throttle at full for 10 seconds (3 short beeps).
• Pull throttle to center, hold for 25 seconds (6 long beeps).
Normal Mode: Push throttle to full (1 short beep). (Default)
Heli Mode: Keep throttle at full for 5 seconds (2 short beeps).
Note: Cutoff voltage: 6.1V is unchangeable.
Recycle ESC power with throttle idle after changing settings.
Recycle power after you hear the Hi Lo Hi Lo confirming beeps after changing settings.
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound)
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
Pull back to center throttle to confirm setting (Hi Lo Hi Lo sound).
9
EN