D) Installing The Ailerons - Reely SKY F-16 Bedienungsanleitung

c) Installing the ailerons
Cut the black rubber tube into four equal parts (1) and put it onto the linkage
(2).
Screw on the aileron arms (3) so that the linkage is flush with the aileron arm at
the top.
Glue together the aileron linkage at the rubber parts in the designated slot on
the fuselage bottom part using 5-minute epoxy glue.
Make sure that the linkage does not come into contact with the glue!
Mark the position on the aileron (1) at which the aileron linkage (2) is to be
inserted into the aileron.
Carefully drill a straight hole into the aileron at that position.
Then glue together the blade with the two hinges (3) and the linkage.
36
Figure 11
Figure 12
Figure 13