Herunterladen Inhalt Inhalt Diese Seite drucken

Error Messages & Protections - STEAMAX SINUOUS FJ 200 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

STEAMAX SINUOUS FJ200 – ERROR MESSAGES & PROTECTIONS
Low Atomizer Protection
If the resistance of the coil is lower than 0.1 ohm in VW mode or 0.05 ohm in TC or TCR mode, the display shows "ATOMIZER LOW".
Atomizer Protection & No Atomizer
If an voltage surge occurs at the atomizer, the unit will display "ATOMIZER SHORT". The display will read "NO ATOMIZER FOUND" when
there is no atomizer connected.
Temperature Protection
If the temperature of the atomizer coil is above the temperature you set, the device will display "TEMP PROTECT". You can continue to
use the device normally.
Device too hot
When the temperature of the device becomes too hot, the power turns off and the display will read "DEVICE TOO HOT". You will be able
to use the device once it has cooled down.
Weak Battery
When the power output of the batteries drops below 2.9 V, the display will read "WEAK BATTERY". The output power will be reduced to
match the voltage output of the batteries.
Charge Batteries
If the power of battery is lower than 10%, the power symbol will flash on the screen.
61
www.steamax.com

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Sinuous p80

Inhaltsverzeichnis