Error Messages & Protections - STEAMAX MAG BABY Bedienungsanleitung

STEAMAX MAG BABY – ERROR MESSAGES & PROTECTIONS
10-Second Safety Feature
If you press and hold the Fire button for more than 10 seconds, the current delivery will automatically switch off. Press the
Fire button once to continue vaping.
Overheating Protection ("TOO HOT!")
If this appears, the internal temperature of the device is too high. Please wait at least 30 seconds before continuing to vape.
Weak Battery ("BATTERY LOW")
If the input voltage is too low, please stop vaping. Please charge the permanently installed battery or replace replaceable
batteries with new or charged 18650 batteries.
Input Voltage too high ("HIGH INPUT")
If the input voltage is too high, the device cannot be operated. If you are using a battery carrier, please replace the 18650
batteries with a new one that meets the requirements stipulated here.
No Atomizer Head detected ("NO COIL")
The device could not detect a atomizer head. Please install a atomizer head or check that it is properly connected.
New Atomizer Head ("NEW COIL?")
A (new) atomizer head was detected in temperature mode (TEMP/TC).
67
www.steamax.com