Tuning In To A Preset Station - JVC KD-LH401 Bedienungsanleitung

Tuning in to a preset station

You can easily tune in to a preset station.
Remember that you must store stations first. If
you have not stored them yet, see "Storing
stations in memory" on pages 12 and 13.
Selecting a preset station directly
1
Select the band (FM1 – 3, AM).
2
Select the number (1 – 6) for the
preset station you want.
14
Each time you press the
button, the band changes as
follows:
Selecting a preset station using the
preset station list
If you forget what stations are stored in which
preset numbers, you can check the preset station
list, then select your desired station.
1
Select the band (FM1 – 3, AM).
Each time you press the
button, the band changes as
follows:
2
Press and hold 5 (up) or ∞ (down)
until the preset station list for the
current band (FM1, FM2, FM3, or AM)
appears on the display.
The current station will be
highlighted on the display.
Ex.: When you select the preset station
number 1 of the FM1 band
Notes:
• You can show the other FM band preset
station lists (FM1, FM2, or FM3) by pressing
5 (up) or ∞ (down).
• If a preset station is an FM RDS station with
PS (programme station) signal, PS name will
be shown instead of the station frequency.
3
Select the number (1 – 6) for the
preset station you want.