HomeMatic HM-LC-Sw1PBU-FM Installationsanleitung Seite 29

The installation steps must be carried out in
accordance with the type of circuit used. Please note
the safety instructions as per Chapter „2 Hazard
information" on page 41.
Beispiel für
HomeMatic
vorhandenen Rahmen
Funk-Aktor
Step 1: Switch off the fuse of the power
circuit.
Step 2: If necessary, pull the rocker off the
frame of the relevant switch.
Then pull the frame off the switch
together with the clamping / retaining
piece. The clamping / retaining piece
can be transparent, grey or black
depending on the manufacturer, and
holds the frame onto the switch.
HomeMatic
Beispiel für
Adapter
vorhandene Wippe
To make removal easier, a flat,
pointed object such as a slotted
screwdriver can be used.
Step 3: Release the wiring and remove the
existing switch if necessary.
Step 4: On-off circuit: Connect the conductor
to the lamp/luminaire at connecting
terminal 2.
Two-way circuit: Connect the two
corresponding supply cables to the
two-way switch at connecting termi-
nals 1 and 2.
Intermediate switch circuit: Connect
the two corresponding supply cables
to the intermediate switch at connec-
ting terminals 1 and 2.
Step 5: Connect the phase conductor to con-
necting terminal L.
Step 6: Connect the neutral conductor to con-
necting terminal N.
Step 7: Connect the neutral conductor of the
lamp / luminaire to the neutral con-
ductor of the house installation.
57