Technical Data; Ec Declaration Of Conformity; Safety Instructions - DeWalt DW718 Handbuch

MITRE SAW DW718, DW718XPS
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough product
E
development and innovation make D
partners for professional power tool users.

Technical Data

Voltage
(U.K. & Ireland only)
Type
Power input
Blade diameter
Blade bore
Blade body thickness
Max. blade speed
Max. cross-cut capacity 90°
Max. mitre capacity 45°
Max. depth of cut 90°
Max. depth of bevel cross-cut 45°
Mitre (max. positions)
Bevel (max. positions)
0° mitre
Resulting width at max. height 90 mm
Resulting height at max. width 345 mm
45° mitre left
Resulting width at max. height 90 mm
Resulting height at max. width 241 mm
45° mitre right
Resulting width at max. height 90 mm
Resulting height at max. width 241 mm
45° bevel left
Resulting width at max. height 61 mm
Resulting height at max. width 345 mm
45° bevel right
Resulting width at max. height 43 mm
Resulting height at max. width 345 mm
31.62° mitre, 33.85° bevel
Resulting height at max. width 168 mm
Automatic blade brake time
Weight
* DW718XPS with worklight LED
L (sound pressure)
PA
K (sound pressure uncertainty)
PA
L (sound power)
WA
K (sound power uncertainty)
WA
Vibration total values (triax vector sum) determined according to EN 61029:
Vibration emission value a
h
a =
h
Uncertainty K =
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 61029
and may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure.
WARNING: The declared vibration emission level represents
the main applications of the tool. However if the tool is used
for different applications, with different accessories or poorly
maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working
period.
WALT one of the most reliable
E
DW718/
DW718XPS
V 230
V 230/115
5
W 1,600
mm 305
mm 30
mm 1.8
-1
min 1,700–3,400
mm 345
mm 241
mm 90
mm 56
left 60°
right 50°
left 48°
right 48°
mm 328
mm 74
mm 231
mm 74
mm 231
mm 74
mm 328
mm 48
mm 328
mm 28
mm 23
s < 10.0
kg 26*
dB(A) 95
3.0
dB(A)
dB(A) 106
dB(A) 3.1
m/s² < 2.2
m/s² 1.5
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may
significantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work
patterns.
Fuses:
Europe
U.K. & Ireland
U.K. & Ireland
NOTE: This device is intended for the connection to a power supply system
with maximum permissible system impedance Zmax of 0.30 Ω at the
interface point (power service box) of user's supply.
The user has to ensure that this device is connected only to a power system
which fulfils the requirement above. If necessary, the user can ask the public
power supply company for the system impedance at the interface point.
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
DW718, DW718XPS
D WALT declares that these products described under "technical data" are
E
in compliance with:
2006/42/EC, EN 61029-1, EN 61029-2-9.
These products also comply with Directive 2004/108/EC. For more
information, please contact D
E
back of the manual.
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of D
Horst Grossmann
Vice President Engineering and Product Development
D WALT, Richard-Klinger-Straße 11,
E
D-65510, Idstein, Germany
29.12.2009

Safety Instructions

WARNING! When using electric tools basic safety precautions
should always be followed to reduce the risk of fire, electric
shock and personal injury including the following.
Read all these instructions before attempting to operate this product and
save these instructions.
E N G L I S H
230 V tools 10 Amperes, mains
230 V tools 13 Amperes, in plugs
115 V tools 16 Amperes, mains
WALT at the following address or refer to the
WALT.
E
27