Changing The Display Pattern; Cancelling The Display Demonstration - JVC kd-lh1000r Bedienungsanleitung

Changing the display pattern

You can change the display pattern.
The number of the selectable display patterns
varies according to the playback sources.
However, the unit basically provides three main
display patterns for each source, and once one
of these three patterns is selected, the same
pattern is used for all the sources.
Press DISP (D).
Each time you press the button,
the display patterns change as
follows:
EX.: When playing a CD
Large animation
display
Small animation
displays*
Clock time
display
* Small animation displays are used for showing
not only the source's main information
(illustrated on this page as examples), but also
showing some other information. For details, see
each related section. (For the DAB tuner, small
animation display will shown no animation.)
In this manual, the illustrations of the display
are mainly of the large animation display
(initial setting). If you have changed the
display patterns or some PSM items, the
actual displays you see will be different.
Note:
While playing a source, you can also show the
level meter on the display. For details, see
"Activating the level meter" on page 27.
8
Cancelling the display
demonstration
When shipped from the factory, display
demonstration (MovieDemo) has been activated,
and starts automatically when no operations are
done for about 20 seconds.
• It is recommended to cancel the demonstration
before you use the unit for the first time.
To cancel the display demonstration, follow
the procedure below:
1
Press and hold SEL
(select) for more than 2
seconds so that
"MovieDemo" appears
on the display.
(See pages 29 and 30.)
2
Select "Off."
3
Press SEL (select) to
finish the setting.
To activate the display demonstration, repeat
the same procedure and select "Interval" or "All
Time" in step 2.
• For more details, see "To set the movie demo—
MovieDemo" on page 30.