JVC kd-lh1000r Bedienungsanleitung Seite 40

To play back tracks repeatedly (Repeat Play)
You can play back the current track or the tracks
on the current disc repeatedly.
1
Press MODE (M) to enter the
functions mode while playing a
disc.
"Mode" appears on the display.
2
Press RPT (repeat), while "Mode"
is still on the display, so that the
RPT indicator is highlighted on the
display.
Each time you press RPT, the
repeat play mode changes as
follows:
Repeat 1
REPEAT indicator
Ex.: When you select "Repeat 1."
RPT
Mode
Indicator
Repeat Highlighted
1
Repeat Flashes
2
When Repeat Play is turned on, the REPEAT
indicator lights up or flashes on the display.
40
Repeat 2
Repeat Off
RPT indicator
(See the following table.)
Plays repeatedly
The current track
(or specified track).
All tracks of the current
disc (or specified disc).
To play back only intros (Intro Scan)
You can play back the first 15 seconds of each
track sequentially.
1
Press MODE (M) to enter the
functions mode while playing a
disc.
"Mode" appears on the display.
2
Press INT (intro), while "Mode" is
still on the display, so that the INT
indicator is highlighted on the
display.
Each time you press INT, the intro
scan mode changes as follows:
Intro 1
INTRO indicator
Ex.: When you select "Intro 1."
INT
Mode
Indicator
Intro Highlighted
1
Intro Flashes
2
When Intro Scan is turned on, the INTRO indicator
lights up or flashes on the display.
Intro 2
Intro Off
INT indicator
(See the following table.)
Plays the beginnings
Of all tracks on
all inserted discs.
Of the first track on each
inserted disc.