Other Main Functions; Changing The General Settings (Psm); Basic Procedure - JVC kd-lh1000r Bedienungsanleitung

OTHER MAIN FUNCTIONS

Changing the general settings
(PSM)
You can change the items listed on the next page
by using the PSM (Preferred Setting Mode) control.
• The PSM items are grouped into five
categories—"Disp (display)," "Clock," "Tuner,"
"Color," and "Audio."

Basic Procedure

1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display.
(See pages 29 and 30.)
2
Press 5 (up) or ∞ (down) repeatedly
until your desired PSM category
appears on the left side of the
display.
3
Select the PSM item you want to
adjust.
28
4
Adjust the PSM item selected.
5
Repeat steps 2 to 4 to adjust the other
PSM items if necessary.
6
Finish the setting.
To set clock—
Clock Hr, Clock Min, 24H/12H
You can set the clock using the PSM control.
• You can select either 12-hour system or 24-
hour system.
1
Press and hold SEL (select) for more than 2
seconds so that one of the PSM items appears
on the display.
Press 5 (up) or ∞ (down) repeatedly until "Clock"
2
is selected as the PSM category (it is shown on
the left side of the display).
Press ¢ or 4
3
(hour)."
4
Turn the control dial to adjust the hour.
Press ¢ or 4
5
(minute)."
6
Turn the control dial to adjust the minute.
Press ¢ or 4
7
8
Turn the control dial to select either "24Hours"
or "12Hours."
9
Press SEL (select) to finish the setting.
to select "Clock Hr
to select "Clock Min
to select "24H/12H."