When using the digital sound field processor with the
Dolby Pro Logic decoder, Dolby Digital decoder or DTS
decoder, you can adjust the delay time between the main
sound and sound effect, and each speaker's output level as
you wish.
Delay Time
You can adjust the time difference between the beginning
of the sound from the main speakers and the beginning of
the sound effect from the rear speakers. The larger the
value, the later the sound effect is generated. The delay
time can be individually adjusted to all DSP programs.
Notes
• Adding too much delay will cause an unnatural effect with some
sources.
• The sound is momentarily interrupted while adjusting the delay
time.
Program
1.
CONCERT HALL
2.
JAZZ CLUB
3.
ROCK CONCERT
4.
DISCO
5CH STEREO
GAME
5.
TV SPORTS
6.
MONO MOVIE
7.
70 mm SPECTACLE
DGTL SPECTACLE
DTS SPECTACLE
70 mm SCI-FI
DGTL SCI-FI
DTS SCI-FI
8.
70 mm ADVENTURE
DGTL ADVENTURE
DTS ADVENTURE
70 mm GENERAL
DGTL GENERAL
DTS GENERAL
9.
PRO LOGIC/NORMAL
DOLBY DIGITAL/NORMAL
DTS DIGITAL SUR./NORMAL
PRO LOGIC/ENHANCED
DOLBY DIGITAL/ENHANCED
DTS DIGITAL SUR./ENHANCED
40
DELAY TIME AND SPEAKER OUTPUT LEVELS
Preset value (ms)
45
30
15
26
2
36
10
69
23
13
13
20
16
16
20
15
15
20
15
15
20
5
5
20
5
5
Sound Output Level of the Center,
Right Rear and Left Rear Speakers,
and Subwoofer
If desired, you can adjust the sound output level of each
speaker even if it has already been adjusted in
"ADJUSTING THE SPEAKER BALANCE" procedure.
Notes
• The sound output level of the center speaker cannot be adjusted in
the following cases:
– when "CENTER SP" in the SET MENU is set to the NON
position (this is because the center channel sound is
automatically output from the left and right main speakers); or
– when you select 6CH INPUT as the input source.
• Once the sound output level has been adjusted, the level will be
the same for all DSP programs.
Speaker
Center
Right rear
Left rear
Subwoofer
Preset value (dB)
0
0
0
0