Gyro Setting (Gyr) - ModelCraft 23 36 14 Bedienungsanleitung

The same procedure can be used for setting „RV.M" and „RV.L". Using the flight conditi-
on switches, you can select between the individual flight condition.

Gyro setting (GYR)

The transmitter gives the possibility, to set the sensitivity of the gyro of your helicopter,
if it is designed for it.
The effectiveness of the gyro can be set for all four flight conditions, each enabling two
settings. By this way the pilot can set the gyro for all conditions to a right value (e.g. for
hover flights) and by changing in another flight condition the sensitivity.
Therefore you must insert a gyro, that offer remote controlling in this case.
Press button „CH-" or „CH+", to display „G" (Gyro).
Press the „FUNCTION-t"-button, to get to the „GYR" menu. The monitor looks like below,
if the normal flight mode (F-Mode) is selected.
Figure 129
Figure 130
Figure 131
191