Switch Reversion (Sw-R, Switch Reverse) - ModelCraft 23 36 14 Bedienungsanleitung

Switch reversion (SW-R, SWITCH REVERSE)

This function enables the reverse of the effect direction of the six rocker switches at the
transmitter casing. The standard setup of the switch is the „NOR" position (normal).
Individual switches cannot be reversed. If you switch the „NOR"
(normal) to „REV" (reverse), it always causes a function change of all
switches.
To get to the „SW-R"display, select „etc" in the channel display line with the buttons
„CH+" or „CH-" (please note that for this you need to be in the „STW" monitor, to verti-
cally change to the display „etc")
With the „FUNCTION- "-button scroll to the „SW-R" display (switch reverse).
With the „INC+/YES"-resp. „DEC-/NO"button you can now change the display from
„NOR" to „REV". All switches on the transmitter are now reversed to the effect direction.
With the „END"-button you can return to the „STW" display.
For all switches „NOR" is the standard position (switch off): Both rocker swit-
ches lying upwards are in the position „upwards" and all four slide switches on
the front side of the transmitter are directed downwards or in your direction.
Using the „SW-R"-Function gives a new Standard-Position: Both rocket switches
downwards and all slide switches upwards are the new Standard-Position
(switch off).
Figure 39
Figure 40
Figure 41
145