Turning The Power On/ Off; Checking The Information - Trotec IC 0120 V Bedienungsanleitung

Turning the Power On / Off
The power indicator remains lit while the power of the
camera is on.
1. Holding the camera cor-
rectly with your right hand,
put your thumb above the
key pad and put your fore-
fi nger in front of the defi -
nable trigger.
2. Press and hold the power
switch for 3 seconds. The
power indicator lights green.
3. After a while, a startup
image will appear on the
screen.
4. To turn off, hold the Power Hold the power switch
for 3 seconds. The power indicator goes off.
Checking the Information on the LCD Monitor
The LCD monitor has a fi eld of vision of 100% of the
actual shooting image.
The display shows the Info view.
Live/
Current Emissivity
Freeze
Operation indicator
Reading
Upper limit of
color scale
Color scale
Lower limit of
color scale
Time
Battery Status
Operating manual – Infrared camera
About the operation indicator
The operation indicator shows the status of the camera.
Status of the camera
= 1.00
NULL E
Menu . . . . . . . . . . . . . . . . . . Represents the menu mode.
Null . . . . . . . . . . . . . . . . . . Represents the non-menu mode
1 - 4 . . . . . . . . . . . . . . Represents the current analysis tool
Cap . . . . . . . . . . . . . . . . . . . . Reprents the current analysis
Isot . . . . . . . . . . . . . . . . Represents the current analysis
E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Current emissivity.
. . . . . . . . . . . . . . . . . . . . . SD card has been inserted.
. . . . . . . . . . . . Bluetooth headset has been installed.
Before starting up the camera, please enter [Null]
mode. Press the cancel key repeatedly until you
see the message „null" in the operation indicator.
no analysis tools selected.
(sport 1 or spot 2 or spot 3).
tool (auto-tracking spot).
tool (isothermnalysis).
B - 6