Hirschmann PowerMICE Handbuch Seite 267

EtherNet/IP
Id Attribute
1 Status
2 Interface
Capability flags
3 Config Control Set/Get
4 Physical Link
Object
5 Interface
Configuration
6 Host name
Tab. 33: TCP/IP Interface-Objekt
UM Grundkonfiguration L3P
Release 7.1 12/2011
Access Data type
rule
Get DWORD
Get DWORD
DWORD
Get Structure: UINT
Path size
EPATH Path
Set/Get Structure:
UDINT IP
address
UDINT
Netmask
UDINT
Gateway
address UDINT
Name server 1
UDINT Name
server 2
STRING
Domain name
Set/Get STRING
10.2 EtherNet/IP-Parameter
Description
Interface Status (0: Interface not configured,
1: Interface contains valid config).
Bit 0: BOOTP Client,
Bit 1: DNS Client,
Bit 2: DHCP Client,
Bit 3: DHCP-DNS Update,
Bit 4: Configuration settable (within CIP).
Other bits reserved (0).
Bits 0 through 3:
Value 0: using stored config,
Value 1: using BOOTP,
Value 2: using DHCP.
Bit 4: 1 device uses DNS for name lookup
(always 0 because not supported)
Other bits reserved (0).
Path to the Physical Link Objekt, always {20H,
F6H, 24H, 01H} describing instance 1 of the
Ethernet Link Object.
IP Stack Configuration (IP-Address, Netmask,
Gateway, 2 Nameservers (DNS, not
supported) and the domain name).
Host name (for DHCP DNS Update).
267