Pioneer DV-600AV-S Bedienungsanleitung Seite 186

09
Additional information
Problem
A connected DVI
component (with HDCP)
doesn't work with this
player.
USB troubleshooting
Problem
USB mass storage device
is not recognized by the
system.
Files don't show up in the
Navigator/Photo
Browser.
Can't play WMA or MPEG-
4 AAC files.
Note
• Static electricity or other external influences may cause malfunctioning of this unit. In this
case, unplug the power cord and then plug back in. This will usually reset the unit for proper
operation. If this does not correct the problem, please consult your nearest Pioneer service
center.
58
En
Remedy
• This unit has been designed to be compliant with HDMI (High
Definition Multimedia Interface). Depending on the component you
have connected, using a DVI connection may result in unreliable
signal transfers.
Remedy
• Make sure you have completely inserted the USB connector to this unit.
• Check that the memory format is FAT16 or FAT32.
• USB devices with an internal USB hub are not supported.
• The files must have the correct file extension: .mp3 for MP3 files; .wma for
WMA files; .m4a for MPEG-4 AAC files; .jpg for JPEG files (upper or lower-
case is OK).
• Make sure the file permission hasn't been restricted (through a password,
etc.).
• The files were recorded using DRM (digital rights management) or
FairPlay copy-protection. This is not a malfunction.