Motorola MTM800 FuG Bedienungsanleitung Seite 28

26 | Getting Started
Table 8: Status Icons
Icon
Trunked Mode Operation
Direct Mode Operation
Send Feedback | |
Description
In Service
No Service
Signal Strength – The more bars, the stronger the signal.
Migration — Displayed when your radio is registered to the foreign network.
Broadcast Call — Displayed when the radio is in the Broadcast Call.
Gateway Mode — Displayed when the radio is switched to work as a gateway in Gateway
Mode.
Scan — Indicates talkgroup scanning is activated in the radio.
Packet Data / Multi-Slot Packet Data (MSPD) / TETRA Enhanced Data Services (TEDS) —
The more blue sections on the icon, the faster the data transfer. Possible five states:
• Four gray sections: context activated – data idle
• One blue (from the left): Packet Data active
• Two blue (from the left): Multi Slot Packet Data active
• Three blue (from the left): TEDS 25 kHz active
• Four blue: TEDS 50 kHz active
Direct Mode Call — Displayed when the radio is receiving a Direct Mode call. The more
bars, the stronger the signal.
Direct Mode — Displayed when the radio is in Direct Mode (radio-to-radio communica-
tion).
Repeater Mode — Displayed when the radio is switched to work as a repeater in Repeater
Mode.
DMO Gateway Communication Mode — Indicates that gateway is selected. The icon has
the following states:
• Solid — while the radio is synchronized with the gateway.
• Blinking — while the radio is not synchronized or during attachment.
• No icon — during a radio to radio and repeater call.
DMO Repeater Communication Mode — Displayed when the Repeater or GW + Rep op-
tion in DMO Mode is selected. This icon has the following states:
• Solid — while the radio has detected the repeater (for example when the radio receives a
presence signal).
• Blinking — while the radio has not detected the repeater or during attachment.
• No icon — during a radio to radio and gateway call.
Table continued...