Powering On The Radio - Motorola MTM800 FuG Bedienungsanleitung

Icon
Enhanced Dual Control Head

Powering On the Radio

Procedure:
1 Press and hold O
N
2 Your radio performs a self-check and registration routine.
Description
Indicates that the radio is being remotely controlled and some commands are being exe-
cuted in the background. For example, when the radio is controlled via special SDS mes-
sages or triggered to send a GPS location report.
Dual Control Head — Indicates that Dual Control Head feature is enabled, and both control
heads are connected to the transceiver.
Single Control Head — Indicates that Dual Control Head feature is enabled, but only one
control head is connected to the transceiver.
Link Error — Indicates that connection between the control head and the transceiver has
been lost, for example, due to an error.
Key Press Token — In Dual Control Head operation, blinking icon indicates that key press
token is reserved by one of the control heads.
CH1 — Indicates that particular activities/settings apply to Control Head 1. Control Head 1
is a control head connected to port 1 on the expansion head.
CH2 — Indicates that particular activities/settings apply to Control Head 2. Control Head 2
is a control head connected to port 2 on the expansion head.
Speaker 1 Off (Low Audio) — Indicates that audio will not sound through the speaker of the
Control Head 1.
Speaker 2 Off (Low Audio) — Indicates that audio will not sound through the speaker of the
Control Head 2.
Speakers Off (Low Audio) — Indicates that speakers of both control heads are off.
All Tones Off/Duplex and Simplex Ring Muted — Indicates that all alert tones are off, or
both simplex ring volume is set to 0 and duplex ring volume is set to 0. Applicable to Con-
trol Head 1.
Simplex Ring Muted — Indicates that simplex ring volume is set to 0 and duplex ring vol-
ume is set to more than 0. Applicable to Control Head 1.
Duplex Ring Muted — Indicates that duplex ring volume is set to 0 and simplex ring volume
is set to more than 0. Applicable to Control Head 1.
All Tones Off/Duplex and Simplex Ring Muted — Indicates that all alert tones are off, or
both simplex ring volume is set to 0 and duplex ring volume is set to 0. Applicable to Con-
trol Head 2.
Simplex Ring Muted — Indicates that simplex ring volume is set to 0 and duplex ring vol-
ume is set to more than 0. Applicable to Control Head 2.
Duplex Ring Muted — Indicates that duplex ring volume is set to 0 and simplex ring volume
is set to more than 0. Applicable to Control Head 2.
button.
Getting Started | 29
| | Send Feedback