3 Select Select List and then a list name.
Your radio displays list name Selected.
4 Select Scanning → On.
Your radio is scanning on the predefined scan list.
Setting Talkgroups in the Active Scan List
When and where to use: If you want to edit talkgroups in the active scan list.
Procedure:
1 From the home screen, press the
2 Select Group Setup → Scan → Active List.
Note: If Scanning is Off is displayed, go to Group Setup → Scan → Scanning → On to enable
scanning.
3 Select View and highlight the required talkgroup.
4 Press M
.
ENU
5 Select one of the following:
•
Delete — Erases this group from the active scan list.
•
Priority and select new priority to Low, Medium or High.
Setting Scan Lists
When and where to use: If you want to set up any scan list.
Procedure:
1 From the home screen, press the
2 Select Group Setup → Scan → Scan Lists.
3 Highlight required scan list and press M
•
Rename — Enters new name for that scan list.
•
Capacity — Displays the number of assigned and unassigned talkgroups for the scan list.
•
Clear — Deletes all the talkgroup assigned to that scan list.
•
Add Group — Adds a talkgroup to the scan list. Select one talkgroup from your talkgroup folders and assign
appropriate priority.
•
Edit — Changes the priority of the required talkgroup or deletes it.
Deleting Talkgroups from Scan Lists
Procedure:
1 From the home screen, press the
2 Select Group Setup → Scan → Scan Lists.
3 Highlight the required scan list and press M
4 Highlight the required talkgroup and press M
My Groups
My Groups is equivalent to Favorites (next section). Both menu items contain shortcuts to favorite talkgroups and
contact numbers, as well as allow to perform the same operations. For a detailed description of the feature, please
refer to Favorites.
key.
MENU
key.
MENU
to see additional settings:
ENU
key.
MENU
→ Edit.
ENU
→ Delete.
ENU
Main Menu | 93
| |
Send Feedback