Inserting Fronius Datamanager Into An Inverter; General; Safety; Fronius Datamanager Plug-In Positions - Fronius Datamanager Bedienungsanleitung

Inserting Fronius Datamanager into an inverter

General

Please see the operating instructions for the respective inverter for information regarding
plug-in card installation.
Please note the safety and warning information in your inverter's operating instructions.

Safety

Fronius Dataman- The Fronius Datamanager plug-in position is specified for each inverter type:
ager plug-in posi-
tions
Inverter
Fronius IG 15 - 60
Fronius IG 300 - 500
Fronius IG Plus,
Fronius IG Plus V
Fronius CL
*)
80
WARNING! An electric shock can be fatal. Danger from grid voltage and DC volt-
age from solar modules.
- The connection area should only be opened by a licensed electrician.
- The separate power stage set area should only be disconnected from the
connection area after first being disconnected from the grid power.
- The separate power stage set area should only be opened by Fronius-trained
service personnel.
Before making any connections, make sure that the AC and DC sides are discon-
nected from the inverter, e.g.:
- Switch off the AC automatic circuit breaker for the inverter
- Cover solar modules
Please observe the 5 safety rules.
WARNING! An electric shock can be fatal. Danger from residual voltage from ca-
pacitors.
You must wait until the capacitors have discharged.
NOTE! Follow general ESD precautions when handling plug-in cards.
Plug-in position
ENS plug
ENS plug
on the far right, unless a ML-MON plug-in card is present
on the far right, unless a ML-MON plug-in card is present
If an ENS plug-in card has been inserted into an ENS slot:
Insert Fronius Datamanager in the next slot to the right of the ENS slot.
*)
*)