Firmware Update Via Lan - Fronius Datamanager Bedienungsanleitung

Procedure:
1
2
3
If the connection to the server fails:
-
-
IMPORTANT! If a proxy server is used to connect to the Internet:
-
-
Firmware update
via LAN
Procedure:
1
2
3
Use your internet browser to open the Fronius Datamanager web interface
Open Settings/Firmware update
Click on the "Run update" button
NOTE! The update process can take several minutes. The power supply to Fro-
nius Datamanager and the internet connection should not be disconnected during
this time. The web interface and the connection to Fronius Solar.access or Fro-
nius Solar.web will not be available during the update process.
The update is complete when the "Supply LED" lights up green.
Deactivate the firewall for the duration of the update
Retry the update
The 'Use proxy server for Web update' selection option must be activated
The required data must be entered
Download the current firmware from the Fronius homepage
Run the downloaded update file on the PC/laptop
This will start a web server from which Fronius Datamanager will download the re-
quired files.
Use your internet browser to open the Fronius Datamanager web interface
137