Calculating The Data Volume; General; Firmware Versions For Calculating The Data Volume; Calculating Data Volumes - Fronius Datamanager Bedienungsanleitung

Calculating the data volume

General

When operating the Fronius Datamanager, data is generated and needs to be transmitted
online.
In order to select a suitable internet connection it is necessary to calculate the data volume.
The following data volume calculation provides an overview of the amount of data gener-
ated when operating Fronius Datamanager.
Firmware ver- The data volume calculation is based on Fronius Datamanager Firmware versions V 2.3.x-
sions for calculat- x and lower.
ing the data
volume Higher firmware versions can cause a higher data volume due to their increased functional
range.
Calculating data The data volume calculation depends on which Fronius Datamanager functions are acti-
volumes vated.
Function
Make real-time data avail-
able in Fronius Solar.web
View real-time data in
Fronius Solar.web
Send archived data/log-
ging data to Fronius So-
lar.web
Sending service messag-
es or errors
1)
2)
3)
IMPORTANT! Since the values listed in the table are "rough data" for Fronius Dataman-
ager and the provider's bill may show discrepancies as a result of the various different
ways of calculating the transfer volume, the total values should be increased by 10-20%.
If the functions have been deactivated, no data volume is generated.
A certain data volume is also required to update the Fronius Datamanager firmware. This
data volume depends on the size of the relevant update package and cannot therefore be
taken into account for any advance calculation of the data volume.
Data Volume
once
Current Total View
per sensor card/sensor box
Current Comparison View
per inverter
Home
System Comparison View
Transmission time
For daily sending
per service message or error
For immediate sending
per service message or error
only after a restart or if the internet connection has been disconnected
Calculation of memory sectors per day according to chapter "Logging", section
"Calculating memory capacity"
depending on the quality of the internet connection
1)
(Memory sectors per day
3)
150 bytes
32 KB/h
42 KB/h
+ 300 KB/h
13 KB/h
+ 4 KB/h
0 KB/h
0 KB/h
2)
x 4 KB) + 8 KB
(600 bytes/min)
1 KB/day
+ 300 bytes
1 KB
111