Siemens SINUMERIK 840D sl Handbuch Seite 826

Erste Schritte
2.2 Beispiel
<td width="16*">Protection</td>
</tr>
<tr>
<td>-</td>
<td>-</td>
<td>60</td>
<td>0</td>
<td>180</td>
<td>7/3</td>
</tr>
</table>
<p></p>
<table border="1" cellspacing="0" cellpadding="2" width="100%">
<tr>
<td><a name="20060[1]"><b>20060[1]</b></a></td>
<td colspan="3">AXCONF_GEOAX_NAME_TAB</td>
<td>-</td>
<td>-</td>
</tr>
<tr>
<td>-</td>
<td colspan="3">Geometry axis name in channel</td><td>BYTE</td>
<td>POWER ON</td>
</tr>
<tr>
<td colspan="6">This MD is used to enter the names of the geometry axes sepa-
rately for each channel.<br />
<tr>
<td>-</td>
<td colspan="5">&nbsp;</td>
</tr>
<tr>
<td width="16*">System</td>
<td width="16*">Dimension</td>
<td width="16*">Default value</td>
<td width="16*">Minimum value</td>
<td width="16*">Maximum value</td>
<td width="16*">Protection</td>
</tr>
<tr>
<td>-</td>
<td>-</td>
<td>0</td>
<td>0</td>
<td>2</td>
<td>7/3</td>
</tr>
</table>
<p></p>
</body>
</html>
22
SINUMERIK Integrate Run MyScreens (BE2)
Programmierhandbuch, 01/2015, 6FC5397-1DP40-5AA2