Siemens SINUMERIK 840D sl Handbuch Seite 632

HT 8
24.3 Funktionsanzeige auf anwenderspezifischen Tasten (U-Tasten) konfigurieren
; Use the following settings to use this status bits instead of the
led map for a specific sk
;U1LED=/channel/parameter/R[U1,1]
;....
;U16LED=/channel/parameter/R[U1,16]
;VarIncLED = DB11.DBX8.5
;SBLLED = DB21.DBX0.4
;WCSLED = DB19.DBX0.7
; Show a LED for the var inc sk
;showVarIncLED = true
; Show a LED for the var single block sk
;showSBLLED = true
; Show a LED for the var wcs/mcs sk
;showWCSLED = true
616
Inbetriebnahmehandbuch, 01/2015, 6FC5397-1DP40-5AA2
SINUMERIK Operate (IM9)