Setup Menu Operating Section - Sony DNV-5 Bedienungsanleitung

2-5 Setup Menu Operating Section

1 Rotary encoder
2 MENU ON/OFF/PAGE switch
3 • MENU CANCEL/ITEM switch
• SUPERIMPOSE ON/OFF switch
1 Rotary encoder
When the cursor is aligned with the page title of a
setup menu, pressing the rotary encoder changes to the
page switching mode. When the cursor is other than
on the page title, pressing the rotary encoder switches
to the mode in which you can change the value of the
current menu setting.
To change the page or vary a setting value, turn the
rotary encoder.
2 MENU ON/OFF/PAGE (menu display/paging)
switch
This switch is used to display the setup menu on the
viewfinder screen or the test signal screen and to page
through the menu items.
ON: Displays the setup menu on the viewfinder
screen or the test signal screen, at the page which
was on the screen when the previous menu access
ended. (When the menu is first used, the SHOT
DATA page is displayed.)
To enable the MENU CANCEL/ITEM switch,
select this position.
OFF: Removes the setup menu from the viewfinder
screen or the test signal screen.
To enable the SUPERIMPOSE ON/OFF switch,
select this position.
PAGE: Every time this switch is pushed down from
the ON position, the next page of the setup menu
is displayed.
2-8(E)
Chapter 2 Locations and Functions of Parts and Controls
Setup menu operating section
3 • MENU CANCEL/ITEM (menu setting
cancellation/item selection) switch (When the
MENU ON/OFF/PAGE switch is set to ON)
• SUPERIMPOSE ON/OFF switch (When the
MENU ON/OFF/PAGE switch is set to OFF)
When the MENU ON/OFF/PAGE switch is set to ON,
this switch is used to select an item on the setup menu
or erase shot ID characters.
CANCEL: Pushing the switch up to this position
allows you to erase shot ID characters.
ITEM: Every time the switch is pushed down to this
position, the cursor (arrow mark) in the page
moves to the next item.
When the MENU ON/OFF/PAGE switch is in the OFF
position, select whether or not to record shot data
together with the video image.
OFF: When in this position, shot data is not
recorded.
ON: When in this position, shot data is recorded.
Note
Operation depends on the items displayed. Check the
menu operation that corresponds to the current item for
details.