Assembly; Preparatory Activities; Scope Of Delivery; Workplace - Holzmann TS 250F-1600 Betriebsanleitung

13

ASSEMBLY

13.1

Preparatory activities

13.1.1 Scope of delivery

After receipt of the delivery, if all parts are in order. Report any damage or missing items immediately
to your dealer or the shipping company. Visible damage must also be recorded without delay in ac-
cordance with the provisions of the warranty on the delivery, otherwise the goods shall be accepted
as properly.

13.1.2 Workplace

Choose a suitable place for the machine. Observe the safety requirements of Chapter 12 and the di-
mensions of the machine from Chapter 11.3.
The selected location must ensure as well as the possibility for connection to an extraction system a
suitable connection to the electrical grid.
Make sure that the floor can support the weight of the machine. The machine must be leveled on all
bases simultaneously.
You must also secure around a distance of at least 0.8 m around the machine. Before and behind the
machine must be provided the necessary distance for the supply of long workpieces.

13.1.3 Preparation of the surface

Eliminate the preservative, which is applied for corrosion protection of the parts without painting. This
can be done with the usual solvents. Here no nitro solvent or similar means, and in no case use wa-
ter.
The use of paint thinners, gasoline, corrosive chemicals or abrasive cleaners will result in
damage to the surface!
Therefore:
When cleaning, use only mild detergent

HOLZMANN Maschinen Austria www.holzmann-maschinen.at
N O T E
ASSEMBLY
Formatkreissäge / panel saw TS 250F-1600
Seite 33