Start-Up; Status Displays - G&D DP1.2-MUX3-ATC Installation Und Bedienung

Start-up

Start-up
Turn on a Power switch on the back of the KVM switch.
As soon as the device is supplied with voltage, the green Power LED lights up. The
KVM switch is ready for operation after the device has booted.

Status displays

The device LEDs allow you to check the operating status at any time.
Area LED
Network Yellow
 Back panel
Green
Power Red.
Main
Status Ready
System
Fail
Ident.
8 · G&D DP1.2-MUX3-ATC
Status Meaning
Flickering Network activity
Off No network activity
On Network connection established
Off No network connection
On The redundant power supply is switched on and
supplies the required voltage.
Off The redundant power supply is switched off or the
connection to the power supply is not established.
On The main power supply is switched on and supplies
the required voltage.
Off The main power supply is switched off or the connection
to the power supply is not established.
On The device is ready for operation.
Off The device is being initialised or is switched off.
On Software has started and is ready for operation
Flashing Software update in progress
Fast The reset button was used to restore the
flashing default settings.
Off Initialising
On The device is not (yet) ready for operation.
Off The device is ready for operation or switched off.
On LED activated to identify the device via OSD
or web application.
Off LED activated to identify the device via OSD
or web application.