Setting The Osd Resolution; Selecting The Keyboard Layout For Inputs On The On-Screen Display - G&D DP1.2-MUX3-ATC Installation Und Bedienung

4. Use the arrow keys
5. Use the arrow keys
6. Enter a time span between
NOTE: Entering the value
7. Press to save your settings.
F2

Setting the OSD resolution

In the default settings of the KVM switch, the OSD is displayed on the desktop
monitor with a resolution of 1024 × 768 pixels if the monitor supports this resolu-
tion. If the monitor does not support this resolution, a resolution of 640 × 480 pixels
is used.
You can also choose a fixed OSD resolution (see table below).
How to adjust the OSD resolution:
1. Press Ctrl+Num (default) to open the on-screen display.
2. Press F11 to open the configuration settings.
3. Use the arrow keys
4. Use the
arrow keys
5. In the
OSD resolution
Auto:
×
640 480/60:
×
720 400/70:
×
1024 768/60:
6. Press to save your settings.
F2
Selecting the keyboard layout for inputs on the on-screen
display
If the characters displayed on the screen are different form the characters entered on
the keyboard of the workstation, the selected keyboard layout is not correct.
to select OSD configuration
to select Close OSD when idle for [s]
5 and 99 seconds and press
0 disables the automatic timeout.
to select General and press
to select
OSD configuration
field select one of the following options by pressing
If supported by the monitor, the OSD is displayed with a res-
olution of 1024 × 768 pixels.
If the monitor does not support this resolution, a resolution of
640 × 480 pixels is used (default).
Display OSD with a resolution of 640 × 480 pixels
Display OSD with a resolution of 720 × 400 pixels
Display OSD with a resolution of 1024 × 768 pixels
Configuration settings in the OSD
and press Enter .
and press Enter
Enter .
Enter .
and press .
Enter
G&D DP1.2-MUX3-ATC · 35
.
:
F8