G&D DP1.2-MUX3-ATC Installation Und Bedienung Seite 128

Controlling the KVM switch via XML
Here is an example of an answer from the XML service:
LISTING THE MONITORING VALUES OF A KVM SWITCH
<?xml version="1.0" encoding="utf-8"?>
<root>
<result type="monitor">
<DlMux4>
<item>
<id>0x11111111</id>
<name>MUX-ATC</name>
<monitorName>Status</monitorName>
<value>1</value>
<alarm>off</alarm>
<acknowledged>no</acknowledged>
</item>
</DlMux4>
</result>
</root>
NOTE: In addition to the name and value of the respective monitoring value, the
two flags
acknowledged
flags to determine whether the monitoring value is within (
required range.
Acknowledged
application.
You can also include several device class tags in the XML tag
56 · G&D DP1.2-MUX3-ATC
and are also always returned. You can use the
alarm
corresponds to the Acknowledged function in the web
alarm
) or outside ( ) the
off on
.
<monitor>