Cleaning The Filler Opening For The Fresh Coffee Powder; Cleaning The Coffee Outlet - Clatronic KA-V 3002 Bedienungsanleitung

2
Fig. 27
Cleaning the filler opening
for the fresh coffee powder
Fig. 28

Cleaning the coffee outlet

2
Fig. 29
1
Fig. 30
4. To do this, turn the brew unit on its head (Fig. 27).
5. Place the upper part of the adjuster (Fig. 27/1) on the the spindle
1
coupling (Fig. 27/2) on the base of the brew unit.
6. Turn the spindle until the distance is approx. 10 mm.
When doing this, make sure that the filter holder remains in the
starting position (Fig. 26/1).
7. Place the brew unit back into the machine
the brew unit"/Points 6-7.
The brew unit should be inserted easily and the service door can be
closed without problem. If this is not the case: Carry out Steps 2 to 6
once again.
1. Remove the brew unit from the machine
the brew unit"/Points 1-2.
2. Remove the cover (Fig. 1/1) from the filler opening for the fresh
coffee powder.
3. Clean the filler opening with the brush supplied (Fig. 1/10).
4. Replace the cover on the filler opening.
5. Remove any coffee residue from the service compartment before
you insert the brew unit again.
6. Place the brew unit back into the machine
the brew unit"/Points 6-7.
Clean the coffee outlet if you intend not to use the machine for a
longer period of time.
WARNING:
Danger of scalding: Switch the machine off and allow it to cool
before cleaning the coffee outlet.
1. Remove the brew unit from the machine
1
the brew unit"/Points 1-2.
2. Push the coffee outlet up as far as possible (Fig. 5/1).
3. Press the clip (Fig. 29/1) to release the lock.
4. Press the coffee outlet backwards and at the same time pull it
down out of the machine.
5. Rinse the coffee outlet with hot water.
6. Put the coffee outlet back into the machine. Make sure that the
clip clicks into place again.
7. Place the brew unit back into the machine
the brew unit"/Points 6-7.
Cleaning and maintenance
Page 54, "Cleaning
Page 54, "Cleaning
Page 54, "Cleaning
Page 54, "Cleaning
Page 54, "Cleaning
57