Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
Rinse the tank refi ll it and let 2 – 3 tanks of fresh cold
water run through the system until you all odours of
the de-scaling product have vanished.
Troubleshooting
Malfunction
Possible Causes
When the
function
selector switch
The device has no power
is operated the
supply.
device does not
switch on.
The water tank is empty.
The tank is not correctly
inserted, the valve is
not open.
The holes in the fi lter
holder and the outlet on
the brewing head are
Coffee stops
blocked.
fl owing.
Air has entered the
„heating element".
Coffee is too fi ne or
pressed too fi rm.
Scale has accumulated
in the espresso machine.
Water tank is empty.
The pump
makes loud
The tank is not inserted
noises.
correctly, the valve is
not open.
The Filter is in the wrong
position or is not closed
The espresso
fi rm enough.
comes out of the
edge of the fi lter
Coffee is on the rubber
holder.
gasket.
Too much coffee in
the fi lter.
The cups were not
warmed beforehand.
The heating up phase
The espresso
had not been completed.
coffee is too
During preparation of
cold.
the coffee the „
" lamp has not yet
gone on.
The coffee has
The espresso was not
a slightly acidic
fresh.
taste.
The coffee
Coffee too coarse or not
foam is slightly
pressed fi rm enough.
discoloured (the
There is not enough
coffee fl ows out
coffee in the fi lter.
quickly).
The coffee foam
Coffee too fi ne or
is a dark colour
pressed to fi rm.
(the coffee
Too much coffee in
only fl ows out
the fi lter.
slowly).
32
6....-05-ES 2968 ProfiCook 32
Remedy
Check the socket with
another device and
insert the mains plug
correctly.
Switch off the device and
fi ll up the water tank.
Press the tank down
slightly so that the valve
opens.
Clean the fi lter holder,
the fi lter and the outlet
on the brewing head.
Produce some steam
(see the section „Prepa-
ring Cappuccino") and
turn the steam regulator
to the highest level.
Loosen the coffee
powder.
The appliance needs
de-scaling
Switch off the device and
fi ll up the container.
Press the tank down
lightly so that the valve
opens.
Remove the fi lter than
refi t or switch off the
machine and tighten
the fi lter.
Please wipe off.
Remove any excess
coffee powder.
Rinse out the cups with
hot water.
Please wait for the hea-
ting up phase to fi nish.
/
Please wait until the
control lamp lights up.
Use the tamper.
Fill in more coffee
powder.
Loosen the coffee
powder.
Remove any excess
coffee powder.
Malfunction
Possible Causes
The adapter is not
correctly inserted.
The second sealing ring
The coffee is not
in the fi lter holder is not
creamy enough.
correctly inserted.
Wrong coffee was used.
The milk used is not
suitable.
The milk is not
The milk is not cold
foamed up.
enough.
The steam nozzle is
dirty.
This device has been tested according to all relevant
current CE guidelines,
such as electromagnetic compatibility and low voltage
directives, and has been constructed in accordance with
the latest safety regulations.
Subject to technical changes without prior notice!
Guarantee
The device supplied by our Company is covered by a
24 month guarantee starting on the date of purchase
(receipt).
During the life of the guarantee any fault of the device or
its accessories *) ascribable to material or manufacturing
defects will be eliminated free of charge by repairing or, at
our discretion, by replacing it. The guarantee services do
not entail an extension of the life of the guarantee nor do
they give rise to any right to a new guarantee!
Proof of the guarantee is provided by the proof of
purchase. Without proof of purchase no free replacement
or repair will be carried out.
If you wish to make a claim under the guarantee please
return the entire machine in the original packaging to
your dealer together with the receipt.
*) Damage to accessories does not mean automatic free
replacement of the whole machine. In such cases please
contact our hotline. Broken glass or breakage of plastic
parts are always subject to a charge.
Defects to consumables or parts subject to wearing
(e.g. motor pistons, kneading blades, drive shafts, spare
remote control, spare toothbrushes, saw blades, etc.) as
well as cleaning, maintenance or the replacement of said
parts are not covered by the guarantee and hence are to
be paid!
The guarantee lapses in case of unauthorized tampering.
After the expiry of the guarantee
After the expiry of the guarantee repairs can be carried
by the competent dealer or repair service against the
payment of the ensuing costs.
Remedy
Insert the adapter
correctly.
Insert the ring correctly .
Change the brand if
necessary.
Check the fat content.
Use low-fat milk.
Use cooled milk.
Clean the steam nozzle.
28.01.2005, 10:16:49 Uhr
Werbung
Inhaltsverzeichnis
