Cleaning The Hot Water/Steam Nozzle; Descaling; Warning Messages - Clatronic KA-V 3002 Bedienungsanleitung

Warning messages

Cleaning the hot
water/steam nozzle
1
2
Fig. 31

Descaling

Warning message
Blocked The brew unit has not been inserted
brew unit correctly.
Insert Brew unit not inserted
brew unit
Dregs box is missing Dregs box not inserted
Fill up Water tank is empty
water tank
Empty Dregs box is full.
dregs box
Water flow error Filter is blocked
Data loss Internal error
Descaling Machine is scaled
58
Clean the hot water/steam nozzle daily.
WARNING:
Danger of scalding: Switch the machine off and allow it to cool
before cleaning the steam nozzle.
1. Remove the steam nozzle (Fig. 31/2) and clean it with warm
water.
2. If the steam pipe is blocked poke carefully from below into the tip
of the pipe (Fig. 31/1) with a needle.
3. Clean the steam pipe with a damp cloth.
4. Place the steam nozzle back onto the steam pipe.
See Page 50, "Descaling".
Warning messages
The following warning messages can appear on the display:
Possible cause Solution
Reinsert the brew unit Page 55, "Releasing the
brew unit".
If the warning message still appears after
cleaning, get in touch with customer services.
Insert the brew unit Page 55, "Releasing the
brew unit".
Insert the dregs box Page 53,
"Cleaning/emptying the coffee dregs box".
Fill up the water tank Page 41, "Filling the water
tank".
Empty the dregs box Page 53,
"Cleaning/emptying the coffee dregs box".
The dregs box must be outside of the machine for
at least 10 seconds for the warning message to
stop.
Clean the filter Page 55, "Cleaning the filters".
If the warning message still appears after
cleaning, get in touch with customer services.
Switch the machine off and then on again.
Descale the machine Page 50, "Descaling".