Pedals; Important Advice - Kettler alu-rad Bedienungsanleitung

Pedals

Assembly
• Turn the pedal which is labelled with an "R" located at the threaded bush in the right-hand pedal arm (the chain wheel side)
to the right and turn the pedal which is labelled with an "L" in the left pedal arm to the left.
• Firmly tighten the pedals (observe the torque)
• With system pedals (click pedal) you should become familiarised with the shoe locking mechanism before going cycling.
• The pedal should be placed in its lowest position to allow attachment of shoe to mechanism.

Important Advice!

Verify that the pedal axle thread is not bent out of line when turning otherwise it will be irreparably damaged.
Observe the torque (see table).
Torques
64