Werbung
ENGLISH
GB
Personal Scales with Column 7830/7831
•
... and steps again onto the scales holding the child.
> Now the display indicates the weight of the child,
e.g."5,1 kg" (11.2 lbs)
When the mother holding the child steps off the scales, the displayed
value in the example reverts to '47,6 kg' (104.7 lbs). Pressing the ON/
TARA key allows you to reset the scales to '0,0 kg' (0.0 lbs).
The scale does not automatically reset to '0,0 kg' (0.0 lbs) so several
taring sessions may be carried out, one after another.
Switching Off
■
The scale automatically switches off when the displayed value has been
'0,0 kg' (0.0 lbs) for approx. 15 seconds.
Changing the Units of Measurement
■
As standard, the scale operates with kg as the unit of measurement.
Please proceed as follows if you want to change the scale's unit of
measurement:
•
Pull the power adapter from the outlet.
•
Press and hold the ON/TARA key whilst simultaneously putting
the power adapter into the outlet.
•
The displayed value changes to lbs.
In order to get back to "kg", please repeat the above mentioned
procedure.
Error messages
■
Zeroing
- no standstill
Taring
– no standstill
– negative value
> Disturb power supply for a moment
Overload, weight is over maximum capacity
> Unload scale
Underload
> contact service dealer
While switching-on, the scale does not show zero
> Unload scale > re-start > contact service dealer
Measuring rod not in the reference position
at power on
> Fully fold the measuring rod when scale is turned
on and fully insert in base.
> check floor stability
> Keep steady on the scale
ON/TARA key
Reset key
Service port
5
Werbung
