Operating Modes; Keys And Functions - WIKA TSD-30 Betriebsanleitung

6. Commissioning, operation

6.2 Operating modes

System start
GB
Display is fully activated for 2s
■
When the temperature switch is powered up within the range of the hysteresis, the output switch is set
■
to "not active" by default.
Display mode
Normal operation, display temperature value
Programming mode
Setting the parameters

6.3 Keys and functions

The temperature switch has two operating modes, the display mode and the programming mode. The
selected operating mode determines the respective function of the key.
16
Jumping into the programming mode
Keep the "MENU" key pressed for approx. 5 s. If the password is set to ≠ 0000,
a password will be requested first-hand. If authentication is successful, then it
enters the programming mode, otherwise it reverts to display mode.
Returning to the display mode
Simultaneous pressing of both keys.
WIKA operating instructions temperature switch model TSD-30