Setting The Special Parameters - REHM INVERTIG.PRO 240 DC Betriebsanleitung

30
3.13 Special parameters
The special parameters can be used by the operator to make 4 machine settings.
3.13.1 Overview of the special parameters
Figure 8: Overview of special parameters

3.13.2 Setting the special parameters

 Rotate the press and rotate button [27] to the maximum possible value I
INVERTIG.PRO 450 AC/DC: I1-Max = 450).
 Press and hold the press and rotate button [27] for 2 seconds. The required
special parameter (SP1, SP2, SP3, SP4, SP5 and CLr) can be selected and
activated by rotating and pressing the press and rotate button [27]. The digital
display flashes [26]. Rotating the press and rotate button [27] again allows
you to set the selected special parameter, and pressing adopts it.
The special parameters are described below.
Functional description
(e.g.
1