Beurer Lightup App Features; Moodlight; Operation - Beurer TL 100 Gebrauchsanweisung

2. Download the "beurer LightUp" app from the Apple App Store (iOS) or Google Play Store (Android).
Note:
Depending on the settings for your smartphone, additional charges may be incurred for connecting to the Inter-
net or transferring data.
3. Open the "beurer LightUp" app.
4. Activate Bluetooth ® on your smartphone. Under the Bluetooth
light TL 100. The blue Bluetooth
been established.
5. Select the "TL 100" device in the app settings. You can now use the app to control the brightlight and to adjust
the moodlight (with brightness control and timer in each case).

6. beurer LightUp app features

After downloading the "beurer LightUp" app and connecting the brightlight to a smartphone via Bluetooth
chapter "Initial use"), you can control the brightlight and the moodlight from the app.
Daylight
You can switch the daylight on and off using the app. In addition, you can also use the app to adjust the bright-
ness and set a timer for the daylight.

Moodlight

You can use the app to adjust the moodlight. The app allows you to select from ten pre-configured moodlight
settings (with brightness control and timer in each case). After activating a moodlight setting, a moodlight with
change of colour begins to light up.
The pre-configured moodlight settings can only be adjusted from the app.

7. Operation

1 Insert the mains part into the connector.
2 Switching on the lamp
 Press the on/off button.
3 LED display/timer
The brightlight TL 100 indicates your current treatment time with the aid of 5 LEDs.
The treatment time can be set at the following 5 levels.
The timer function is not activated when the light is switched on for the first time. The light now shines
until it is switched off again or a treatment time is set (timer = 0 min).
In order to use the timer, set the desired level from 1 to 5 using the +/− buttons. On level 1, a treatment
time of 15 minutes is set. The other levels are as follows:
Treatment time
15 minutes
30 minutes
45 minutes
90 minutes
120 minutes
The light switches off automatically after this treatment time. If you wish to deactivate the timer function,
you can press the - button until the LEDs go out.
4 Brightness adjustment
The brightlight TL 100 has 10 brightness levels. The desired brightness level can be set using the +/−
buttons on the side – this level should be set so that it is pleasant for the eye during the treatment.
When the device is switched off, the last level that was set is saved. When the device is next switched
on, it restarts with the saved brightness level.
Note:
The device can also be used up to level 5 as a reading lamp.
® LED on the brightlight will light up once the connection to the smartphone has
Number of lit LEDs
1
2
3
4
5
12
® menu item on your smartphone, select the bright-
® (see