User Interface Introduction - PeakTech 1360 Bedienungsanleitung

5. Vertical control area with 3 buttons and 4 knobs.
"CH1" and "CH2 " correspond to setting menu in CH1 and CH2, "Math" button refer
to math menu, the math menu consists of six kinds of operations, including CH1-CH2,
CH2-CH1, CH1+CH2, CH1*CH2, CH1/CH2 and FFT. Two "Vertical Position" knob
control the vertical position of CH1/CH2, and two "Scale" knob control voltage scale
of CH1, CH2.
6. Default: Call out the factory settings.
7. Print
8. Counter: Turn on/off the Counter.
9. DMM (optional) or Snapshot
10. Direction key: Move the cursor of the focused parameter.
11. M knob(Multipurpose knob): when a
you can turn the M knob to select the menu or set the value. You can push it to close
the menu on the left and right.

User Interface Introduction

1
29
28
27
26
25
Figure 3-5 Illustrative Drawing of Display Interfaces
1. Waveform Display Area.
2. Run/Stop (touchable on touchscreen) (see "How to Use Executive Buttons" on
P73)
3. The state of trigger, including:
3.Junior User Guidebook
4
3 5
2
24
23 22
symbol appears in the menu, it indicates
6 7 5 8
8
9
10 11 12
13
14
15
16
17
18
19
20
21