Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
®
Ecureuil
AS 350
Glue the two doublers (H11) to either side of the front mechanics bearers (H9), flush with the
outside edges. When the glue has cured continue the two 3 mm Ø holes through parts (H11).
Fix the two mechanics bearers (H9) and (H10) to the mechanics using four M3 x 16 socket-
head cap screws fitted from the underside; be sure to install the front bearer (H9) with the
recess at the rear and the doublers (H11) on top.
11
Werbung
Kapitel
Inhaltsverzeichnis
