Playing A Disc - Sharp SD-AT100H Bedienungsanleitung

Playing a disc

SD-AT100H
ENGLISH
Turn on the TV, and switch the input to the "VIDEO 1" or "VIDEO 2" etc. accord-
ingly.
[Front]
E-27
1
Press the ON/STAND-BY button to
turn the power on.
The startup screen appears.
2
Press the FUNCTION button to set the input to "DVD".
z Select "DVD" when playing a video or audio CD.
z The same operation can be performed by pressing the DVD/CD
the remote control.
3
Press the OPEN/CLOSE button to open the disc compartment.
z The disc size is automatically detected by
the unit (12 cm (5") or 8 cm (3")). Place the
Data side
disc in the proper position on the disc hold-
er.
z Place the disc with the label side facing to-
ward you.
Disc holder
4
Press the OPEN/CLOSE button to close the disc compartment.
If the disc you are using supports auto start, it starts playing automatically (even
if you do not press the button), as soon as you close the disc compartment.
5
If you cannot start playback in step 4, press the
This can be operated by pressing the DVD/CD
Note:
When the unit is turned on or the input source is switched to "DVD", no operation will
be accepted for 5 seconds as the unit is proceeding the initial setting.
01/11/16 SD-AT100H(H)E3.fm
button on
button.
button on the remote control.